PaKeT62 Example Files

Paket62 Example Files

This page content is a follow up on configuring the Kenwood THD7e and TS2000 internet TNC to be used with the Packet Radio Program PaKet6.2 written by Tony VK2DHU. Paul G4APL prefers using this program as it is DOS Based and can be used with any External TNC2 Clone or PK232. The software come with extensive help accessed via the F1 Key and supported by a 200 page online manual via the ALT/F1 Key.

It also has extensive scripting, that has been used to auto connect to remote systems, node hopping via multi NetRom Nodes then connected to remote user for one to one contacts, TNOS,JNOS system. Auto Connecting to Convers Systems, and BBS's to send and receive Personal Mail and Bulletins.

The software also contains it's own personal Mail System (PMS)

This is just a few of the features, the online help details the rest. This program has been run on Pc and Laptops all Windows version up to WinXP using a short cut o call C:\PaKet\PaKet.EXE. Assuming he programs have been unzipped into C:\PaKet

Filenames must confirm toe the 8.3 DOS format

When Paket starts up it check for an C:\PaKeT\autoexec.scp file. This is useful to pre-configure the TNC. More so, if you are using an internal TNC built into a Transceiver e.g. Kenwood THD7e TS2000e.

These Internal TNC's have a limited command set. Refer to the research carried out by Henk PE1DNN TDH7e Though G4APL has used them since 2000 for portable to connect by to the GB7CIP Caterham AX25/IP Gateway. So long as a local Amateur Radio Node Access Point is operation on 2 metres or 70cm and well connected to the rest of the Network via Radio or internet Tunnels.

autoexec.scp
: FILE AUTOEXEC.SCP
: C:\PAKET\AUTOEXEC.SCP
: If this file is present when PaKet starts up it will be processed
: 15.4.2006 Used with Kenwood THD7E
: 24.7.2008 and TS2000 Internal TNC
: PLEASE ENTER YOUR OWN CALLSIGN AFTER FIST MYCALL - Replaces current
: Setting in THD7e TS2000 Internal TNC
S MYCALL MYCALL
S CT QTH Poole South Dorset /P Only 1 TNC user allowed^V^MTry CONV at GB7CIP-5
S CONOK ON
S ECHO OFF
S MCOM ON
S MO ON
s user 1
S RET 15
S FRACK 6
S PERSIST 128
! CD \PAKET\SCRIPT
:

To configure the PaKet62 program, this is carried out via the software System configuration screen. Press the ALT/Z keys. The configuration file is saved to C:\PaKeT\paket.cfg
Two example follow, one used for the TS2000 using Hardware Flow Control and the other for THD7E that uses Software Flow Control

Paket_TS2000 paket.cfg example configuration file.
Replace the three MYCALL with your callsign MYCALL=CALL, my callsign
paket.cfg

VERS=paKet 6.2
MYCALL=MYCALL
MYNAME= PAUL
MSGLEVEL=A
MSGDELAY=3
DEFAULTDIR=C:\PAKET\
TEXTDDIR=C:\PAKET\TEXT\RECV\
TEXTUDIR=C:\PAKET\TEXT\
BINDDIR=C:\PAKET\BIN\RECV\
BINUDIR=C:\PAKET\BIN\
LOGDIR=C:\PAKET\LOG\
PMSDIR=C:\PAKET\PMS\
SCRIPTDIR=C:\PAKET\SCRIPT\
MANUALFILE=C:\PAKET\PAKET.DOC
TNCFILE=C:\PAKET\TNC2.HLP
EDITOR=C:\RPED
SCRIPTFILE=AUTOEXEC.SCP
DIRPATH=C:\PAKET\SCRIPT\CIPBB41.SCP
F5DEFAULT=C:\PAKET\
F7DEFAULT=C:\PAKET\BIN\
DUMPFILE=
EDITFILE=C:\PAKET\
BUDDYS=C:\PAKET\PAKET.DIR
TYPECMD=C:\LIST7.COM
PORT=2
BAUD=9600
PARITY=N
AWLEN=8
STOPS=1
HSHAKE=HW
DCDCON=Y
RESTART=RESET
DOUBLE=ON
NEWMODE=OFF
MAXWINDOWS=1
STTYPE=A
PP=Y
NDW=0
BDW=0
NPACL=128
BPACL=230
DAYTIME=Y
CFGHELP=N
ADDCTRLZ=N
CGASNOW=0
BLANKDELAY=1800
ARROWS=R
AUTOLOG=N
LOGHDRS=Y
DISPMEM=N
BREAKCODE=C
REMOTE=Y
AUTOMENU=N
TRIGGER=29
REMUP=Y
REMDOWN=Y
THIRDPARTY=Y
CALLHOURLY=N
CALLMINS=
CALLDAILY=N
CALLTIME=02:30
BBSCALL=
BBSSCRIPT=N
BBSPATH=
DELFWD=N
WPM=99
YAPPWAIT=10
PMSMSG=4
ADDLFPRT=N
ADDLFTNC=N
INSTOGGLE=Y
ALARMS=N
CWALARMS=N
QUIET=Y
ENHKB=Y
PASSCODES=X
KISSOFF=192 255 192
STREAMID=A,B,C,D,E,F,G,H,K,J
STREAMSW=|,|,|,|,|,|,|,|,|,|
INBUF=5,5,1,1,1,1,1,1,1,1
FBBUF=32,10,4,4,2,2,2,2,5,10
STATUS=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
TA=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
TALINES=2,2,2,2,2,2,2,2,2,2
SINGLE=Y,Y,Y,N,Y,Y,Y,Y,Y,Y
JUSTIFY=N,N,N,N,N,N,N,N,N,N
WW=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
WWSTART=60,60,60,60,60,60,60,60,60,60
WWEND=79,79,79,79,79,79,79,79,79,79
BELLS=3,2,3,800,1,1,1,1,1,1
PHONE=N,N,N,N,N,N,N,Y,Y,Y
PROCESS=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
COLSTATUS=WHITE,BLACK,YELLOW,BLACK,GREEN,BLACK
COLCOMMS=BLACK,CYAN,WHITE,CYAN,WHITE,BROWN
COLMSG=WHITE,GREEN,LIGHTGREEN,BLACK,BLACK,GREEN
COLBIN=LIGHTGRAY,BROWN,WHITE,BROWN,WHITE,BROWN
COLHELP=WHITE,BROWN,WHITE,YELLOW,YELLOW,BROWN
COLTNCHELP=WHITE,RED,WHITE,BLACK,LIGHTGRAY,RED
COLTA=WHITE,LIGHTGRAY,LIGHTGRAY,BROWN,WHITE,BROWN
COLCFG=BLACK,LIGHTGRAY,WHITE,LIGHTGRAY,WHITE,BROWN
COLDIR=WHITE,LIGHTGRAY,LIGHTGREEN,BLACK,DARKGRAY,LIGHTGRAY
COLMAN=BLACK,LIGHTGRAY,LIGHTMAGENTA,BLACK,LIGHTCYAN,BLUE
*** Start of Keyboard Macros
1 Hello de Paul in Caterham Surrey IO91wh^M
2 QTH is located 16 miles due south of the City of London on the Surrey Hills^
0 Good Bye all de Paul^M
*** Start of Beginning Auto Commands
STREAMCA OFF
STREAMDBL ON
8BITCONV ON
FLOW ON
USER 1
CT QTH Poole Dorset /P
CONOK ON
my mycall
str $7C
ECHO OFF
*** Start of Ending Auto Commands
STREAMCA ON
STREAMDBL OFF
8BITCONV OFF
FLOW ON
CMS ON
CT Caterham On The Hill Surrey
MO OFF
USER 1
MY mycall
*** Start of Alerts
SIGNED ON.

Paket_TS2000 paket.cfg example configuration file.
Replace the three MYCALL with your callsign MYCALL=CALL, my callsign
paket.cfg.

VERS=paKet 6.2
MYCALL=MYCALL
MYNAME= PAUL
MSGLEVEL=A
MSGDELAY=3
DEFAULTDIR=C:\PAKET\
TEXTDDIR=C:\PAKET\TEXT\RECV\
TEXTUDIR=C:\PAKET\TEXT\
BINDDIR=C:\PAKET\BIN\RECV\
BINUDIR=C:\PAKET\BIN\
LOGDIR=C:\PAKET\LOG\
PMSDIR=C:\PAKET\PMS\
SCRIPTDIR=C:\PAKET\SCRIPT\
MANUALFILE=C:\PAKET\PAKET.DOC
TNCFILE=C:\PAKET\TNC2.HLP
EDITOR=C:\RPED
SCRIPTFILE=AUTOEXEC.SCP
DIRPATH=C:\PAKET\SCRIPT\CIPBB41.SCP
F5DEFAULT=C:\PAKET
F7DEFAULT=C:\PAKET\BIN\
DUMPFILE=
EDITFILE=C:\PAKET\
BUDDYS=C:\PAKET\PAKET.DIR
TYPECMD=C:\LIST7.COM
PORT=2
BAUD=9600
PARITY=N
AWLEN=8
STOPS=1
HSHAKE=SW
DCDCON=Y
RESTART=RESET
DOUBLE=ON
NEWMODE=OFF
MAXWINDOWS=1
STTYPE=A
PP=Y
NDW=0
BDW=0
NPACL=128
BPACL=230
DAYTIME=Y
CFGHELP=N
ADDCTRLZ=N
CGASNOW=0
BLANKDELAY=1800
ARROWS=R
AUTOLOG=N
LOGHDRS=Y
DISPMEM=N
BREAKCODE=C
REMOTE=Y
AUTOMENU=N
TRIGGER=29
REMUP=Y
REMDOWN=Y
THIRDPARTY=Y
CALLHOURLY=N
CALLMINS=
CALLDAILY=N
CALLTIME=02:30
BBSCALL=
BBSSCRIPT=N
BBSPATH=
DELFWD=N
WPM=99
YAPPWAIT=10
PMSMSG=4
ADDLFPRT=N
ADDLFTNC=N
INSTOGGLE=Y
ALARMS=N
CWALARMS=N
QUIET=Y
ENHKB=Y
PASSCODES=X
KISSOFF=192 255 192
STREAMID=A,B,C,D,E,F,G,H,K,J
STREAMSW=|,|,|,|,|,|,|,|,|,|
INBUF=5,5,1,1,1,1,1,1,1,1
FBBUF=32,10,4,4,2,2,2,2,5,10
STATUS=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
TA=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
TALINES=2,2,2,2,2,2,2,2,2,2
SINGLE=Y,Y,Y,N,Y,Y,Y,Y,Y,Y
JUSTIFY=N,N,N,N,N,N,N,N,N,N
WW=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
WWSTART=60,60,60,60,60,60,60,60,60,60
WWEND=79,79,79,79,79,79,79,79,79,79
BELLS=3,2,3,800,1,1,1,1,1,1
PHONE=N,N,N,N,N,N,N,Y,Y,Y
PROCESS=Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
COLSTATUS=WHITE,BLACK,YELLOW,BLACK,GREEN,BLACK
COLCOMMS=BLACK,CYAN,WHITE,CYAN,WHITE,BROWN
COLMSG=WHITE,GREEN,LIGHTGREEN,BLACK,BLACK,GREEN
COLBIN=LIGHTGRAY,BROWN,WHITE,BROWN,WHITE,BROWN
COLHELP=WHITE,BROWN,WHITE,YELLOW,YELLOW,BROWN
COLTNCHELP=WHITE,RED,WHITE,BLACK,LIGHTGRAY,RED
COLTA=WHITE,LIGHTGRAY,LIGHTGRAY,BROWN,WHITE,BROWN
COLCFG=BLACK,LIGHTGRAY,WHITE,LIGHTGRAY,WHITE,BROWN
COLDIR=WHITE,LIGHTGRAY,LIGHTGREEN,BLACK,DARKGRAY,LIGHTGRAY
COLMAN=BLACK,LIGHTGRAY,LIGHTMAGENTA,BLACK,LIGHTCYAN,BLUE
*** Start of Keyboard Macros
1 Hello de Paul in Caterham Surrey IO91wh^M
2 QTH is located 16 miles due south of the City of London on the Surrey Hills^
0 Good Bye all de Paul^M
*** Start of Beginning Auto Commands
STREAMCA OFF
STREAMDBL ON
8BITCONV ON
FLOW OFF
USER 1
CT QTH Poole Dorset /P
CONOK ON
my mycall
str $7C
ECHO OFF
*** Start of Ending Auto Commands
STREAMCA ON
STREAMDBL OFF
8BITCONV OFF
FLOW ON
CMS ON
CT Caterham On The Hill Surrey
MO OFF
USER 1
MY mycall
*** Start of Alerts
SIGNED ON.

Example Connect script file cipbb41.scp

: FILE TO CONNECT TO GB7CIP BBS via GB7SW-2, GB7SW-4, G0CGL-1
: C:\PAKET\SCRIPT\CIPBB41.SCP
G START
:TRYAGAIN
S ^C
S D
D 60
:START
S ^C
W 60,cmd:
G GIVEUP
S C GB7SW-2
W 320,*** CONNECTED to GB7SW-2
G TRYAGAIN
S C G0CGL-1
W 480,Connected to WOOL:G0CGL-1
G TRYAGAIN
S C GB7CIP-5
W 500,Connected to GB7CIP-5
G TRYAGAIN
S your_password
W 500,Enter ?
G TRYAGAIN
S C GB7CIP
W 500,Connected to CIPBBS:GB7CIP
G TRYAGAIN

Q

T HELDMSG, are currently on
W 600,>
G PAUSE

Q

TheSkywaves

Paket62 Example Files